Thermage 0.25cm2 eye TIP 450 REP uses precise, shallow heating to smooth and tighten the skin of the upper and lower eyelids, reduce hooding and soften fine lines and crow’s feet. This tip has and no vibration function. Works for all systems and with 1,1mm heating dept.
Buy other products here
Benefits of :
How long does the result last for?
Some redness, mild swelling and discomfort may occur at the site of injection. Resolution usually occurs with two to three days.
Thermage 0.25cm2 ST Eye Tip 450 REP is placed in contact with the skin surface to transmit the radiofrequency pulses from the Thermage CPT system to generate heat. Only qualified and extensively trained practitioners should be allowed to operate the Thermage CPT system. The patient should be made aware that they should provide feedback whenever their treatment site gets too painfully hot. Remove the makeup and jewelry on the patient before starting treatment. Position them onto the treatment table and attach the grounding pad onto them. Attach the cable connected to the Thermage CPT device onto the grounding pad, which should be secured to the patient’s back or abdomen. Clean the skin at the treatment area with isopropyl alcohol. Place the temporary grid system from a Thermage Skin Making Paper onto the treatment area while the skin is still damp. The membrane of the being used should remain intact before and during the procedure. Apply a generous amount of Coupling Fluid onto the treatment area. Place the treatment tip onto the skin; apply even pressure while you do so. To deliver passes, you can use one of the following techniques: two single passes with three to five vector passes in the direction skin tightening is desired, or one super pass. The latter is recommended for the and entails treating one row of squares and then one row of circles on the grid in an alternating manner. Allow the epidermis to cool between passes. Treatment may end when skin tightening can be observed or felt.
In conclusion you contact us via with email infos .